Computer System Selection - Canon LV-5220 Owner's Manual

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan
system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal
format and tunes to project a proper image without any additional setting. (Signal formats provided in this projector is
shown on page 59 )
Note:
The projector may display one of the following messages.
When the projector cannot recognize connected
Auto
signal conforming to PC Systems provided in this
projector, Auto PC Adjustment function works to
display proper images and the message "Auto" is
displayed on the PC System menu box. When the
image is not projected properly, manual adjustment is
required. (p30, 31)
There is no signal input from computer. Check the
-----
connection of your computer and the projector. (See
" Troubleshooting" p54)
User preset system manually adjusted in PC Adjust
Mode 1
menu. Adjustment data can be stored in Mode 1 - 5.
(p30, 31)
PC Systems provided in the projector. The projector
SVGA 1
chooses a proper system and displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1 Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the PC System Menu icon.
2 Press the Point
the system that you want to set, and then press the SET
button.
28
7 8 buttons to move the red frame
d d button to move the red arrow pointer to
PC System Menu
The Auto PC Adjustment
function operates to adjust the
projector.
PC System Menu
The PC System Menu icon
displays the system being
selected.
Custom Mode (1~5) set in the
PC Adjust Menu. (p30, 31)
The systems on this dialog
box can be selected.