Canon LV-8225 User Manual page 34

Computer Input
Reset
To reset the adjusted data, select Reset and press the
OK button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then
press the Point ► or the OK button. Move the highlight
to the Mode that you want to clear and then press the
OK button.
Store
To store the adjusted data, select Store and then press
the Point ► or the OK button. Move the highlight to one
of the Modes 1 to 10 in which you want to store, and
then press the OK button.
Note:

• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is
selected in the PC System Menu (p.31).
• When input computer signal to the projector, PC adjust will become available.
34
Mode free
Values of Total dots, Horizontal
position, Vertical position, Display area
H, and Display area V.
Store
Press MENU
button to close this
dialog box.
This Mode has stored
parameters.
Vacant
Press OK button to
store the data.