Canon LV-8225 User Manual page 55

Enter a Logo PIN code
Use the Point ▲▼ buttons to enter a number. Press
the Point ◄► buttons to fix the number and move
the red frame pointer to the next box. The number
changes to . If you fixed an incorrect number,
use the Point ◄► buttons to move the pointer to
the number you want to correct, and then enter the
correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer
to Set. Press the OK button so that you can start to
operate the projector.
If you entered an incorrect Logo PIN code, Logo
PIN code and the number () will turn red for
a moment. Enter the correct Logo PIN code all over
again.
Change the Logo PIN code lock setting
Use the Point ▲▼ buttons to switch On or Off, and
then press the OK button to make a choice.
Logo PIN code change
Logo PIN code can be changed to your desired four-
digit number. Press the OK button to select Logo
PIN code change. Current logo PIN code dialog
box appears, use the Point ▲▼buttons to enter the
correct code. The New Logo PIN code input dialog
box appears. Set a new Logo PIN code, confirmation
box appears, choose Yes to set the new Logo PIN
code.
Be sure to note the new Logo PIN code and keep it
on hand. If you lost the number, you could no longer
change the Logo PIN code setting.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO
PIN CODE, WRITE DOWN THE NEW
PIN CODE AS A REMINDER. SHOULD
THE LOGO PIN CODE BE LOST OR
FORGOTTEN, THE LOGO PIN CODE
SETTING CAN NO LONGER BE CHANGED.
Note:
If you forget your Logo PIN code and unable to
change it, the Logo PIN code can be reset to the
factory default setting (431) according to the
following procedures.
When you reset the Logo PIN code, the PIN code
and Key lock will be reset, as well.
1. Unplug the AC Power Cord from the AC outlet.
. Hold down the OK button on the projector and
connect the AC Power Cord into the outlet
again. Keep holding down the OK button until
the POWER indicator lights. The Logo PIN
code returns to the factory default setting while
the Logo PIN code lock state will remain the
same as the previous set state.
Enter a Logo PIN code
After a correct Logo PIN code
is entered, the following dialog
box appears.
Change the Logo PIN code lock setting
Change the Logo PIN code
Setting
55