Remote Control Unit Operation 8 - Canon LV-8225 User Manual

Basic Operation
Using the remote control unit for some frequently used operations is advisable. Just pressing one of the buttons enables
you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER 1/2, VIDEO, S-VIDEO and
COMPONENT buttons
Press the COMPUTER 1/, VIDEO, S-VIDEO and
COMPONENT buttons on the remote control unit to
select the input source. See pages 30, 41-4 for details.
FREEZE button
Press the FREEZE button on the remote control unit to
freeze the picture on the screen, meanwhile, volume is
muted. To cancel the Freeze function, press the FREEZE
button again or press any other button.
Fig.1 will appear on the screen while the Freeze function
is working.
Fig.1
INFO. button
Display the input source information: Input, H-sync
freq., V-sync freq., Screen, Language, Lamp status,
Lamp counter, Power management mode, Key lock,
PIN code lock, Remote control and SERIAL NO. (p.64)
D.ZOOM buttons
Press the D.ZOOM buttons on the remote control unit to
enter to the Digital zoom +/– mode. See pages 38,40 for
details.
LAMP button
Press the LAMP button on the remote control unit to
select the lamp mode for changing the brightness on the
screen.
High ............. Brighter than the Normal mode.
Normal ......... Normal brightness
Eco .............. Lower brightness reduces the lamp
power consumption and extends the
lamp life.
8
Remote control unit Operation
Remote control unit
COMPUTER 1/2
buttons
VIDEO
button
FREEZE
button
D .ZOOM
buttons
Note:
See the next page for the description of
other buttons.
COMPONENT
button
S-VIDEO
button
INFO. button
LAMP button