Canon LV-8225 User Manual page 53

Background
Select the background screen for when no input
signal is detected. Press the Point ▲▼ buttons to
switch between each option.
blue........Project a blue background.
User........Project an image captured in the Logo
setting.
Black......Project a black background.
Display
This function decides whether to display On-Screen
Displays.
On............................ Show all the On-Screen
displays. Use this function
when you want to project
images after the lamp
becomes bright enough. The
factory default setting is in this
option.
Countdown Off....... Show the input image instead
of the countdown when
turning on the projector. Use
this function when you want to
project the image as early as
possible even when the lamp
is not bright enough.
Off ........................... Hide the On-Screen Displays
except;
● On-Screen Menu.
● Power off? (p. 3)
● P-Timer display. (p. 9)
● No signal for Power
management (p. 56)
● Please wait ...
● Arrows for the True function
in the Screen Menu. (p. 39)
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo
with Logo select, Capture, Logo PIN code lock and
Logo PIN code change functions.
Note:

When On is selected in the Logo PIN
code lock function, Logo select and
Capture functions cannot be selected.
Logo select
This function decides on the starting-up display from
among following options.
User......... Show the image you captured.
Default .... Show the factory-set logo.
Off ........... Show the countdown display only.
Logo select
Setting
53