Canon SELPHY DS810 Photo Printing Manual page 93

You may cause injury or damage the printer if you ignore any of these safety precautions.
Choosing a location
Power supply
Working around the
printer
Print Head and Ink
Tank
During printing
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight,
outdoors, or close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation
free).
Do not place the printer on a thick rug or carpet.
Ensure that the area around the power outlet is kept clear at all times
so you can easily unplug the power cord if necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/ cord.
Never use a power supply source other than the one rated for the printer in the country where
you purchased the printer.
AC 100-240 V, 50/60 Hz
Never put your hands or fingers in the printer while it is printing.
Do not place any metal objects (paper clips, staples, etc.) or containers of flammable solvents
(alcohol, thinners, etc.) on top of the printer.
Should any foreign object (metal or liquid) fall into the printer, unplug the power cord and call
for service.
When installing or transporting this printer, do not incline it, lay it down on its side, or turn it
upside down. Ink can leak.
For safety reasons, store Print Head and Ink Tank out of the reach of small children.
If a child should ingest any ink, consult a doctor immediately.
Do not shake Print Head and Ink Tank.
Ink may leak out and stain clothing or the surrounding area.
Never touch the electrical contacts on a Print Head after printing.
The metal parts may be very hot and could cause burns.
Do not touch the part around the ejecting paper during printing.
This could cause the printer to malfunction.
Appendix
91