Performing Infrared Communication - Canon SELPHY DS810 Photo Printing Manual

Performing Infrared Communication

You can print photos in your mobile phone or PDA.
When printing through infrared communication, also refer to the manual of your
mobile phone or PDA.
Turn on the printer.
Load the paper.
See "Loading Paper" on page 20.
Set the print setting.
See "Setting the Page Size, Media Type, and Layout When Printing from a
Mobile Phone or a PDA" on page 51.
Start Infrared Communication.
(1) Oppose the infrared port of the mobile phone or the PDA to that of the printer at a
distance of less than 7.9 inch (20 cm).
Note
The effective angle of the Infrared Port of the printer is about 10° from the central axis
in both vertical and horizontal directions.
The allowable distance of communication with the printer depends on the mobile
phone or the PDA you use. For this distance, refer to the manual of your mobile phone
or PDA.
Infrared Port of printer
Less than 7.9 inch (20 cm)
(Do not block with any
obstacle.)
Infrared Port
(2) Select the photo to print and send the data to the printer using the infrared
communication function of the mobile phone or the PDA.
Printing will start after receiving all data.
Printing Photographs from a Wireless Communication Device
Effective angle
(in both vertical and horizontal direction): About 10°
53