Preparing The Printer; Step - Canon SELPHY DS810 Photo Printing Manual

Easy Setup Instructions

Preparing the Printer

Place the printer on a flat surface.
Plug the power cord into the back of the printer and connect the other
end to a power outlet.
• Never attempt to plug the Power Cord into the power outlet or unplug the Power
Cord when your hands are wet.
• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not
place heavy objects on the power cord.
• Never use any power supply other than the standard power supply available in the
country of purchase. Using the incorrect voltage and frequency could cause a fire or
electric shock.
• Always push the plug all the way into the power outlet.
Press the POWER button. The printer will initialize.
Note
If you leave the printer more than five minutes without using any button on the
operation panel, the LCD goes into sleep mode automatically. Press the OK button to
turn on the LCD again.
4
Important
* During printing, part of the sheet is ejected
from the back of the printer.
Leave 12cm (4.7in) or more clear space at the
back of the printer.