Canon SELPHY DS810 Photo Printing Manual page 49

Confirming or Changing the Device Settings
To change the paper size or paper type, operate the device to select the
PictBridge print setup mode and confirm or change the settings.
The settings below can be changed by pressing the S S ettings button when the
device is connected. However, changes can be made on the Settings screen
only when the corresponding items below are in D D efault (selections based on
the printer setting) using the controls of the device.
PictBridge compliant device
setting items
Paper size: Default
Paper type: Default
Layout: Default
Image Optimize: Default
About the Settings Explained Below
The settings explained on the following pages cannot be made on some
devices. If any setting cannot be made, the default setting explained above is
used.
Names of settings that are displayed on Canon PictBridge compliant devices
are used in the description given below.
Different names may be displayed on your device depending on the brand or
model.
For details, refer to your device's instruction manual.
About Image Data Format for Printing
This printer accepts images* taken with a camera compatible with the Design
rule for Camera FIle system and PNG files.
*Exif 2.21 compliant
About "Paper size" and "Paper type"
When you have selected D D efault (selections based on the printer setting), the
printer operates based on the Settings screen. To print on Photo Paper Pro,
select F F ast Photo from P P aper type on the display of the device. Select P P hoto for
Printing Photographs Directly from a Digital Camera
Printer setting on the Settings screen
You can change the printer settings on tab1.
See "Print Setting Items" on page 25.
You can change the printer settings on tab2.
See "Print Setting Items" on page 25.
47