Canon SELPHY DS810 Photo Printing Manual page 74

Printing Maintenance
Prepare a replacement Ink Tank.
Insert the Ink Tank.
Close the Cover.
The Print Head Holder moves to the right.
Important
Be sure to reset the ink counter using the following procedure when changing the Ink
Tank.
Notes
• To maintain optimal print quality, use an Ink Tank within six months of its first use.
• Once an Ink Tank has been used, do not remove it from the printer and leave it out in
the open. This will cause the Ink Tank to dry out and the printer may not function
properly if it is reinstalled.
• Color ink is consumed in the cleaning and deep cleaning, which are necessary to
maintain the printer's capabilities.
• When an Ink Tank runs out of ink, replace the Ink Tank with a new one immediately.
• If printing is continued with no ink in the Ink Tank, a problem may occur.
72
(1) Unpack a new Ink Tank and remove the orange
protective cap.
Dispose of the protective cap.
Important
• Do not reattach the protective cap once you have
removed it.
• Once the protective cap is removed, do not touch
the open ink port.
(1) Set a new Ink Tank with it slightly
slanted aligning the
mark.
(2) Push down on the
Tank until it clicks into place.
mark with the
on the Ink