Printing Is Blurred/Colors Are Wrong/White Streaks Appear - Canon SELPHY DS810 Photo Printing Manual

Troubleshooting
Possible Cause
Paper Jams

Printing is Blurred/Colors are Wrong/White Streaks appear

Possible Cause
Ink Tank is not installed
Media type is not
selected properly
Print Head Nozzles
clogged/Print Head is
misaligned
Media is not loaded with
the print-side up
78
Try This
(1)Slowly pull the paper out from the back of the printer or, from
the front of the printer.
• If the paper does not come out from the front of the printer or
the back of the printer, or the paper tears and some of it is left
in the printer, turn the printer off, then open the Cover and
remove the piece of paper. Do not touch internal parts in the
printer.
• If you cannot extract the paper, turn
the printer off, and then turn it back
on.
The remaining paper will be ejected
automatically.
(2)Close the Cover and reload the paper into
the Paper Support, then press the OK
button on the printer.
• If you have turned on the power again
at the step (1), redo the printing.
• If you cannot reach or remove the torn
paper, do not attempt to disassemble the printer by yourself.
Contact a Canon service representative.
Try This
If an Ink Tank is not installed, install it. If an Ink Tank is installed, push
the PUSH mark on the Ink Tank to ensure it has snapped firmly into place.
Ensure that the media type selected in the Settings screen is the
same type as the media type loaded on the printer.
See "To Change Print Setting" on page 24.
Print the nozzle check pattern to check for uneven ink output.
See "Printing the Nozzle Check Pattern" on page 66.
• When a specific color is missing from the nozzle check pattern,
clean the Print Head. If ink supply is uneven: See "Print Head
Cleaning" on page 67.
• Print Head is misaligned.
Align the Print Head. See "Aligning the Print Head" on page 69.
If this does not solve the problem, Ink Tank may run out of ink.
Replace the vacant Ink Tank.
See "Replacing an Ink Tank" on page 71.
Check that your paper is loaded with the correct print side facing up.
See "Loading the Print Media" on page 21.
Note
Follow the instructions packaged with your specialty media for
loading and handling.