Canon PIXMA iP3300 Series Quick Start Manual page 76

Error Message On Camera
"Printer error"
*1
To resume printing, you can also press the RESUME/CANCEL button on the printer instead of
selecting Continue on the camera.
*2
The ink absorber absorbs ink used during cleaning, for example. If this message appears, you will
need to call for servicing to replace the absorber and to check the printer for proper operation.
72 Troubleshooting
An error requiring servicing may have occurred. (Printer POWER lamp flashes
green and ALARM lamp flashes orange alternately.)
Disconnect the cable between the printer and the camera, turn off the printer,
and unplug the power cord of the printer from the power supply. After a while,
plug the power cord of the printer back in, turn on the printer, and then
reconnect the camera to the printer.
If the same error occurs, contact your Canon service representative.
Action