Canon PIXMA iP3300 Series Quick Start Manual page 16

4
In the printer driver, select Auto Sheet Feeder for Paper Source.
See "Printing with Windows" on page 15 or "Printing with Macintosh" on page 16.
Note
Select the page size of the loaded paper in Page Size (Windows) or Paper Size (Macintosh) in the
printer driver.
Loading Paper in the Front Feeder
You can load A4, Letter, or B5-sized plain paper (such as Canon Super White Paper SW-201) in
the Front Feeder. You cannot load any other paper in the Front Feeder.
1
Flatten the four corners of the paper before loading it.
See "Flatten the four corners of the paper before loading it." on page 11.
2
Prepare to load paper.
(1) Open the Front Feeder.
(2) Extend the Output Paper Support.
(3) Set the Paper Thickness Lever to the left.
3
Load the paper with the print side facing DOWN.
(1) Load the paper in the Front Feeder with the
print side facing DOWN and the leading edge
to the far side.
(2) Align the right edge of the paper stack against
the inner face of the Front Feeder, and the
near and left edges with the Paper Size Mark.
(3) Pinch the Paper Guide and slide it against the
left side of the loaded paper stack.
12 Before Printing
(3)
(2)
(A)
(3)
(1)
Do not load higher than the Load Limit
Mark (A).
(1)
(2)