Straight Stitches - Brother Computerized Sewing and Quilting Machine Operation Manual

SEWING THE STITCHES

Straight Stitches

Note
When using the twin needle (see page 32), be sure to attach presser foot "J".
Stitch
Stitch Name
Key
Straight stitch (Left)
Straight stitch (Left)
Straight stitch
(Middle)
Straight stitch
(Middle)
Triple stretch stitch
Stretch stitch
Decorative stitch
Basting stitch
.
a Left needle position
b Middle (center) needle position
Memo
" " at the beginning of the stitch shown on the key indicates that reverse stitches are sewn when the "Reverse/
Reinforcement Stitch" button is pressed. " " at the beginning of the stitch shown on the key indicates that reinforcement
stitches are sewn when the "Reverse/Reinforcement Stitch" button is pressed.
66
Presser
Applications
Foot
General sewing, gather, pintuck,
etc. Reverse stitch is sewn while
pressing "Reverse/
Reinforcement Stitch" button.
General sewing, gather, pintuck,
etc. Reinforcement stitch is sewn
while pressing "Reverse/
Reinforcement Stitch" button.
General sewing, gather, pintuck,
etc. Reverse stitch is sewn while
pressing "Reverse/
Reinforcement Stitch" button.
General sewing, gather, pintuck,
etc. Reinforcement stitch is sewn
while pressing "Reverse/
Reinforcement Stitch" button.
General sewing for
reinforcement and decorative
topstitching
Reinforced stitching, sewing and
decorative applications
Decorative stitching, top
stitching
Basting
J J
a b
Stitch width
[mm (inch)]
Auto Manual Auto
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
3.5 0.0 - 7.0 2.5
(1/8) (0 - 1/4) (3/32)
3.5 0.0 - 7.0 2.5
(1/8) (0 - 1/4) (3/32)
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
1.0 1.0 - 3.0 2.5
(1/16) (1/16 - 1/8) (3/32)
0.0 0.0 - 7.0 2.5
(0) (0 - 1/4) (3/32)
0.0 0.0 - 7.0 20.0
(0) (0 - 1/4) (3/4)
a
a Reverse stitch
b Reinforcement stitch
Stitch length
Twin
[mm (inch)]
Needle
Manual
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
0.2 - 5.0 OK
(1/64 - 3/16) ( J )
1.5 - 4.0 OK
(1/16 - 3/16) ( J )
1.0 - 4.0 OK
(1/16 - 3/16) ( J )
1.0 - 4.0 OK
(1/16 - 3/16) ( J )
5.0 - 30.0
NO
(3/16 - 1-3/16)
b