Upgrading Your Machine's Software - Brother Computerized Sewing and Quilting Machine Operation Manual

UPGRADING YOUR MACHINE'S SOFTWARE

You can use a computer to download software upgrades for your sewing machine.
When an upgrade program is available on www.brother.com, please download the files following the instructions
on the web site and steps below.
Note
There are two upgrade files. Be sure to download both files successively.
Memo
• When the machine's software is upgraded, saved combinations of character and decorative stitches are erased.
• While the software is being upgraded, the buzzer will not sound when a key is pressed.
a
While holding the "Presser Foot Lifter" button
pressed, turn on the machine.
→ The following screen appears.
Press LOAD after saving the
upgrade file in the
machine.
b
Plug the USB cable connectors into the
corresponding USB ports on the computer
and on the machine.
→ The "Removable Disk" icon appears in "My
Computer" on the computer.
c
Copy the upgrade file to "Removable Disk".
→ The message "Connected to PC. Do not disconnect
the USB cable." appears.

UPGRADING YOUR MACHINE'S SOFTWARE

d
When the screen shown in step
again, press
→ The message "Saving the upgrade file. Do not turn
main power to OFF."appears. The download takes
about 3 minutes.
e
When the following screen appears, the first
upgrade file is downloaded.
Press LOAD after saving the
upgrade file in the
machine.
f
Copy the second upgrade file to "Removable
Disk".
g
When the screen shown in step
again, press
→ The message "Saving the upgrade file. Do not turn
main power to OFF."appears. The download takes
about 3 minutes.
a
appears
.
a
appears
.
6
149