Appliqués; If The Needle Does Not Catch The Fold; If The Needle Catches Too Much Of The Fold - Brother Computerized Sewing and Quilting Machine Operation Manual

SEWING THE STITCHES
f
Remove the basting, and then turn over the
fabric.
a
a Wrong side of fabric
b Surface of fabric
Memo
Blind hem stitches cannot be sewn if the needle does
not catch the fold on the left side. However, if the
needle catches too much of the fold, the fabric cannot
be unfolded and too much of the seam will appear on
the surface of the fabric, leaving an unattractive finish.
If either of these occur, follow the instructions below to
correct the problem.

■ If the Needle Does Not Catch the Fold

Press in the width display so that the needle
slightly catches the fold.

■ If the Needle Catches Too Much of the Fold

Press in the width display so that the needle
slightly catches the fold.
80
b
Appliqués
a
Use a temporary spray adhesive or basting to
attach the appliqué to the fabric.
a
b
a Appliqué
b Fabric glue
b
Press or .
Memo
• Adjust the stitch width and length according to the
shape, size and fabric quality of the appliqué (see
page 44).
• For details on the stitches, refer to the "STITCH
SETTING CHART" at the end of this manual.
c
Attach presser foot "J", and then sew along
the edge of the appliqué, making sure that the
needle drops slightly off the edge.
a Appliqué
a Needle drop point
a
a