Table of Contents
Advertisement
Click Finish button, system pops up a dialogue box. Click the OK button, the startup
wizard is complete. See Figure 3-13.
3.4 Live Viewing
After you logged in, the system is in live viewing mode. You can see system date, time,
channel name and window No. If you want to change system date and time, you can
refer to general settings (Main Menu->Setting->System->General). If you want to
modify
the
channel
Menu->Camera->CAM name)
1
Recording status
2
Motion detection
Tips
Preview drag: If you want to change position of channel 1 and channel 2 when you
are previewing, you can left click mouse in the channel 1 and then drag to channel
2, release mouse you can switch channel 1 and channel 2 positions.
Use mouse middle button to control window split: You can use mouse middle
button to switch window split amount.
Please note you can not switch position of one analog channel and one digital
channel.
Preview Control
The preview control function has the following features.
Support preview playback.
In the preview desktop, system can playback previous 5-60 minutes record of
current channel. Please go to the Main Menu->General to set real-time
playback time.
Support drag and play function. You can use your mouse to select any
playback start time.
Support playback, pause and exit function.
Figure 3-13
name,
please
refer
3
4
to
the
display
settings
Video loss
Camera lock
(Main
26
Advertisement
Table of Contents
