④
Turn the device upside down and
then turn the screws in firmly.
2.3.5 1.5U series
This series DVR max has four SATA HDDs. Please use HDD of 7200rpm or higher.
○
1
Loosen the screws of the
upper cover. Remove the
cover.
○
4
Connect the other end of
the HDD cable to the
mainboard.
2.3.6 2U series
This series DVR max supports 8 SATA HDDs. Please use HDD of 7200rpm or higher.
①
Loosen the screws of the
upper cover and side panel.
Remove the cover.
⑤
Connect the HDD cable and
power cable.
.
○
2
Line up the HDD to the
four
holes
of
the
bracket. Use four screws to
fix HDD.
○
5
Connect the power cable
to the HDD.
②
Fix
the
HDD(s)
bracket. Remove the top
bracket if you want to install
⑥
Put the cover in accordance
with the clip and then place the
upper cover back. Secure the
screws in the rear panel and the
side panel.
○
3
Connect the one end of the HDD
HDD
cable to the HDD.
.
○
6
Put the cover back and fix the
screws to secure firmly.
③
Connect the one end of the HDD
on
the
cable to the HDD.
11