Dahua XVR User Manual page 253

Please refer to the following sheet for detailed information.
Parameter
Enable
Interval
Window split
Delete
Up/Down
Add channel group
Click ,you can see system pops up the following dialogue box. See Figure 4-100.
Please select the channels and then click OK button.
Delete channel group
Figure 4-99
Function
Check the box here to enable this function.
It is to set the interval from current channel group to the next
channel group.
Support 1-window split only.
Select a channel group and then click
Click or to adjust channel tour sequence.
Figure 4-100
to delete it.
244