Series - Dahua XVR User Manual

④
Turn the device upside down and
then turn the screws in firmly.
⑦
Put the cover in accordance with the
clip and then place the upper cover
back.
Important:
 You can connect the HDD data cable and the power cable first and then fix the HDD
in the device.
 Please pay attention to the front cover. It adopts the vertical sliding design. You need
to push the clip first and then put down.
2.3.4 1U Series
The 1U series DVR has two SATA HDDs.
① Loosen the screws of the upper
cover and side panel. Remove
the cover.
⑤
Fix the HDD firmly.
⑧
Secure the screws in the rear panel
and the side panel.
②
Fix four screws in the HDD
(Turn just three rounds).
⑥
Connect the HDD cable and
power cable.
③
Place the HDD in accordance
with the four holes in the bottom.
10