Video Matrix - Dahua XVR User Manual

the Web and you can select zero-channel encoding mode at the right corner of the
interface

3.11.5.3 Video Matrix

Here you can set matrix output channel and its interval. You can set HDMI2 port tour
and its interval See Figure 3-176.
 Enable tour: Check the box here to enable this function.
 Interval: Input proper interval value here.
 Resolution: The resolution of the tour window. Please note this function is for HDMI
only.
Split: You can select window split mode from the dropdown list. For BNC, it supports

1-split mode only. For HDMI, it supports 1/4/9/16-split mode. Some series product
support 24/36-split. Please refer to the actual product.
 Add: Under specified window split mode, click it to add channel group. See Figure
3-177.
 Modify: Double click a channel or select a channel and then click Modify button, you
can change current channel setup. See Figure 3-178.
 Delete: Click it to remove selected channel group.
 Move up: Click it to move current selected channel up.
. Select a mode; you can view the local preview video.
Figure 3-175
157