Tripwire - Dahua XVR User Manual

 Select a channel from the dropdown list.
 Click Add button to add a rule and then select a rule type from the dropdown list.
 Click to draw the rule. For detailed information, please refer to chapter
3.11.3.2.1 Tripwire, 3.11.3.2.2 Intrusion, chapter 3.11.3.2.3 Abandoned.
 Click to set corresponding parameters. Please refer to chapter 3.11.3.2.1.
Tripwire for detailed information.
 Check the box to enable current rule.
 Click Apply button to complete the setup.
3.11.3.2.1 Tripwire (Optional)
Note:
 The tripwire function is valid once your network camera or your DVR supports this
function.
If your purchased DVR supports the tripwire function, it supports one analog channel.

It is not for the digital channel.
System generates an alarm once there is any object crossing the tripwire in the specified
direction.
From main menu->Setting->Event->Intelligence->Tripwire, the interface is shown as
below. See Figure 3-119.
Figure 3-118
115