What If There Are Problems - Beurer BM 96 Cardio Instructions For Use Manual

11. What if there are problems?

Problem /
Error Message
Error Code
Error Code
Error Code
Error Code
Error Code
Error Code
Error Code
Error Code
The device will not
switch on.
Possible cause
It was not possible to correctly
record the pulse.
No measurement could be
taken.
The cuff is fastened too tightly
or loosely.
Errors occur during the meas-
urement.
The pump pressure is higher
than 300 mmHg.
There is a system error.
• The ECG signal is unstable or
too weak. No ECG signal found.
• Contact pressure on the skin
is too weak.
• The measurement was inter-
rupted.
The batteries are almost empty.
The batteries are flat.
The batteries have been inserted
incorrectly.
Solution
Please repeat the measurement.Make
sure that the cuff tube is properly
inserted and that you do not move or
talk.Re-insert the batteries if neces-
sary, or else replace them.
Please repeat the measurement.Make
sure that the cuff tube is properly
inserted and that you do not move or
talk.Re-insert the batteries if neces-
sary, or else replace them.
If this error message appears, please
contact Customer Services
Repeat the measurement as per the
instructions in these Instructions for
use.
Repeat the measurement as per the
instructions in these Instructions for
use.
Replace the batteries.
Replace the batteries.
Re-insert the batteries, observing the
correct polarity (-/+).
64