Haussmann MT250 Manual page 27

MAINTENANCE INSTRUCTIONS
Maintenance & Repairs
WARNING: Service, testing and repairs may
only be carried out by service technicians in
conformity with the regulations valid in
Canada.
We recommend our customer service
department (repair centre). Addresses can be
found at the beginning of these operating
instructions and in the warranty.
Please hand these operating instructions to the
repair centre. An overview of spare parts can be
found at the end of these operating instructions.
Upon request a repair manual is sent to the
service technicians.
Only use original supplier spare parts.
Cleaning
For regular clenaning: Carry out the following steps
once a week, or more often if used frequently:
Clean the cooling air vents.
Use non-metallic tools to clean the air vents.
WARNING! To avoid accidents, always
disconnected the tool from the power supply
before cleaning.The tool may be cleaned most
effectively with compressed dry air. Always wear
safety goggles when cleaning tools with
compressed air.
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objects
through openings.
CAUTION! Certain cleaning agents and
solvents damage plastic.Some of these are:
gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household
detergents that contain ammonia.
EN
27