Installation - HIKVISION DS-2CE11D0T-PIRLO User Manual

Keep the camera away from liquid while in use for

non-water-proof device.
While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.
Mark Description
Mark
1 Introduction
1.1 Product Features
The main features are as follows:
High performance CMOS sensor

IR cut filter with auto switch

OSD menu with configurable parameters

Auto white balance

SMART IR

Strobe light alarm

Alarm out

PIR detection

3-axis adjustment

Alarm linkage with DVR

1.2 Overview
This manual applies to two types of the bullet camera.
The overviews of each type are shown in the figures
below.
1.2.1 Overview of Type I Camera
Lens
White Light
Source
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
Figure 1-2 Overview of Type II Camera Installation

2 Installation

Before you start
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with

your power output to avoid the damage.
Table 0-1 Mark Description
Description
DC Voltage
Bracket
Main Body
Lens
PIR
Bracket
Video Cable
Main Body
PIR
Alarm Cable
Video Cable
Power Cord 12
Alarm Cable
Power Cord
VDC