Digital Operator Components - Omron SYSDRIVE 3G3XV-EV2 Series Operation Manual

Digital Operator Components

2-1 Digital Operator Components
Red indicator lights
during FWD run
Red indicator lights
in DRIVE Mode
and goes out in
PRGM Mode.
Depressing this key
changes Mode to
DRIVE or PRGM.
While depressing this
key, jog speed is
available. Effective
only in DRIVE Mode.
Selects FWD or REV
run. Effective only in
DRIVE Mode.
Red indicator lights by
depressing RUN.
RUN command is input.
Effective only in DRIVE
Mode.
Indicator Operation
INVERTER
OUTPUT
FREQUENCY
STOP KEY
FREQUENCY
SETTING
RUN
indicator
STOP
indicator
;Light ;Blink
28
Red indicator lights
during REV run.
Red indicator lights by
depressing STOP.
The RUN and STOP indicators are turned on and off in accordance
with the following operations:
RUN KEY
;Out
Section 2-1
Red indicator lights by external
terminal commands.
SEQ: When RUN/STOP
signal is used.
REF: When frequency ref.
is used.
Depressing this key changes
the display repeatedly.
Its procedures are described
in DRIVE Mode (next page).
Changes numeral such as
frequency ref.
Displays the contents of
data. Depressing this key
again after changing stores
the contents. Effective only
in PRGM Mode.
Selects numerical digits.
This key resets operation at
faults.
STOP command is input.
(Motor stops in either
Mode.)
STOP
KEY