The Following Screen Is Displayed During Setup; The [Access Points] Dialog Box Is Displayed During Setup - Canon PIXMA MP800R Setup Manual

Problem
No printer is detected
after the network
settings are changed
in Windows

The following screen is displayed during setup

Problem
The [Access Points]
dialog box is
displayed during
setup
Possible Cause and Measures
Wait until the IP address is assigned to the computer. You may need to
restart your computer. When you are using Windows Me or Windows
98, you need to restart the computer. Search for the machine again
after confirming a valid IP address is assigned to the computer.
Possible Cause and Measures
The [Access Points] dialog box is displayed when:
– No access point is detected.
– Multiple access points are detected.
– Entry of a network key is necessary to communicate with the target access point.
Select the target access point, then perform necessary operation such
as setting of encryption.
If you want to specify access point manually, click [Manual Setup] in
the [Access Points] dialog box. Enter the settings for the target access
point in the [Manual Setup] dialog box, then click [Connect]. The target
access point is searched with the specified settings.
For changing settings of the access point, refer to the manual provided
with the access point or contact its manufacturer.
Important
If you connect to a network that is not protected with security
measures, there is a risk of disclosing data such as your personal
information to a third party.
SSID
Enter the SSID set to the access point. The SSID is case sensitive.
When using AirPort, enter the network name (SSID) in alphanumeric
characters.
SSID is also called ESS-ID. For details, refer to the manual provided
with your access point or contact its manufacturer.
Troubleshooting 61