Canon PIXMA MP800R Setup Manual page 63

Problem
The [Access Points]
dialog box is
displayed during
setup
(Continued)
62 Troubleshooting
Possible Cause and Measures
Encryption Method
Do not use
Select to disable encryption.
Use WEP
Transmission is encrypted using the WEP key you specified.
Use WPA
Transmission is encrypted using the passphrase (WPA key) you
specified.
The actual encryption key is renewed automatically at a certain time
interval, making the transmission harder to break.
Use WPA2
Transmission is encrypted using the passphrase (WPA2 key) you
specified.
The actual encryption key is renewed automatically at a certain time
interval, making the transmission harder to break.
Note
If a WEP key/Passphrase (WPA or WPA2 key) has not been set, a
detailed settings dialog box is displayed. To change the settings, click
[Configuration] in the [Manual Setup] dialog box. For details, refer to
"About Network Key (Windows)/Network Password (Macintosh)" on
page 58.
Configuration
The detailed settings dialog box is displayed. The network password
(WEP) or the network key (WPA) selected in [Encryption Method] can
be confirmed and changed.
Connect
Connects to the specified access point.
Network (SSID)
Enter the Network (SSID) set to the access point. The Network (SSID)
is case sensitive. When using AirPort, enter the Network (SSID) in
alphanumeric characters.
SSID is also called ESS-ID. For details, refer to the manual provided
with your access point or contact its manufacturer.