Canon PIXMA MP800R Setup Manual page 44

7
Setup automatically detects access points.
Important
If you connect to a network that is not protected with security measures, there is a risk of disclosing
data such as your personal information to a third party.
When your access point is detected automatically
The access point is detected automatically if no operation is required for connecting to the
access point. Setup proceeds to step 8.
If the [Access Points] dialog box is displayed
(1) Select the target access point in the [Access
Points] dialog box.
If the target access point is not displayed in the
list, see "The target access point is not
detected" on page
Note
The machine may detect other access points used in
the vicinity.
(2) Confirm the [Encryption] column of the
selected access point.
If the [Encryption] column is blank, click [Connect].
If [WEP], [WPA], or [WPA2] is displayed in the [Encryption] column, the access point is
configured to use the encryption.
Enter the Network Password (WEP key or Passphrase) set to the access point and click
[Connect].
For details, see
page 58.
If "An access point could not be detected" is displayed
Click [OK] to display the [Access Points] dialog box. For details, see
is not detected" on page
8
Setup automatically detects the machine.
The MP800R connected with the USB cable is detected automatically.
When the machine is detected automatically
The machine is detected automatically if no operation is required for connecting to the
machine. Setup proceeds to step 9.
If the [Printer IP Address Setup] dialog box is
displayed
If the machine is not detected automatically, the
[Printer IP Address Setup] dialog box is displayed.
Click [Connect] to connect to the machine. If the
machine is still not detected, see
IP Address / Printer IP Address Setup] dialog box is
displayed during setup" on page
57.
"About Network Key (Windows)/Network Password (Macintosh)" on
57.
"The [Set Printer
64.
Setting Up the Machine and the Computer (Macintosh)
"The target access point
43