Canon PIXMA MP800R Setup Manual page 65

Problem
The [Set Printer IP
Address / Printer IP
Address Setup] dialog
box is displayed
during setup
64 Troubleshooting
Possible Cause and Measures
The following dialog box is displayed if no printer was detected on the
network. Specify the IP address of the machine and click [Connect] to
retry the detection of the target printer.
(1) Get IP address automatically
Select to use an IP address provided by a DHCP server. This requires
that the DHCP function is enabled on the router or access point.
(2) Use next IP address
Select to manually specify an IP address, for example if there is no
DHCP server functionality in the network environment in which you are
using the machine.
IP Address/Subnet Mask/Default Gateway
Enter each value to specify a fixed IP address when [Use next IP
Address] is selected.
(3) Network Information
Displays the [Network Information] dialog box. Click this button to
confirm network settings when your access point or your machine
cannot be detected automatically during setup for use over the
network. This button is enabled when an access point was not
detected or could not be connected.
(4) Connect
Searches for the machine with the specified settings. If the machine is
still not be detected with a specified IP address, see
to the machine (the machine is not detected)" on page
Note
Clicking [Back] displays the [Access Points] dialog box.
(1)
(2)
(3)
(4)
"Cannot connect
60.