The Following Screen Is Displayed During Setup - Canon PIXMA MP620 Series Getting Started

--(A)
(B)
( C ) - - - - - - -
.;. e-..
~
l.e-""""--(D)
......-
(C) Configuration
The detailed settings dialog box is displayed. The network password (WEP) or the network key
(WPNWPA2) selected in Encryption Method can be confirmed and changed.
(0) Connect
Connects to the specified access point.
The following screen is displayed during setup
The Access Points dialog box is displayed when:
- No access point is detected.
- Multiple access points are detected.
Select the target access point, then perform necessary operation such as setting of encryption.
If you want to specify access point manually, click Manual Setup in the Access Points dialog box.
Enter the settings for the target access point in the Manual Setup dialog box, then click Connect.
The target access point is searched with the specified settings.
For changing settings of the access point, refer to the manual provided with the access point or
contact its manufacturer.
T~ U ...
" If you connect to a network that is not protected with security measures, there is a risk of
disclosing data such as your personal information to a third party.
" If a password (WEP key)/passphrase (WPNWPA2 key) has not been set, a detailed set-
tings dialog box is displayed. To change the settings, dick the Configuration in the Manual
Setup dialog box. For details, refer to "3.1 About Network Key (VVindows)/Network Pass-
word (Macintosh)" on page 2.
(A) Network (SSIO)
Enter the Network (5SI0) set to the access point. The Network (5510) is case sensitive. When
using AirPort, enter the Network (S510) in alphanumeric characters.
SSIO is also called E55-10. For details, refer to the manual provided with your access point or
contact its manufacturer.
(8) Encryption Method
" Do not use
Select to disable encryption
• Use WEP
Transmission is encrypted using the password (WEP key) you specified.
" UseWPA
Transmission is encrypted using the passphrase (WPNWPA2 key) you specified.
The actual encryption key is renewed automatically at a certain time interval, making the trans-
mission harder to break.
(C) Configuration
The detailed settings dialog box is displayed. The password (WEP key) or the passphrase (WPN
WPA2 key) selected in Encryption Method can be confirmed and changed.
(0) Connect
Connects to the specified access point.
This message is displayed when no access point is detected. Clicking the OK displays the Access
Points dialog box. For details, refer to "2.1 The target access point is not detected" on page 1.
aa
~
·:""-(A)
-(C)
" If a WEP key/Passphrase (WPNWPA2 key) has not been set, a detailed settings dialog box
is displayed. To change the settings, dick the Configuration in the Manual Setup dialog
box. For details, refer to "3.1
About Network Key (VVindows)/Network Password (Macintosh)"
on page 2.
(A) SSIO
Enter the S510 set to the access point. The 5510 is case sensitive. When using AirPort, enter the
network name (5SI0) in alphanumeric characters.
5510 is also called E55-10. For details, refer to the manual provided with your access point or
contact its manufacturer.
(8) Encryption Method
" Do not use
5elect to disable encryption.
• UseWEP
Transmission is encrypted using the WEP key you specified.
" UseWPA
Transmission is encrypted using the passphrase (WPNWPA2 key) you specified.
The actual encryption key is renewed automatically at a certain time interval, making the trans-
mission harder to break.
~ -
--
--
3