Canon PIXMA MP800R Setup Manual page 33

4
When the [Setup Preparations] dialog box is
displayed, confirm that preparation is
complete, then click [Next].
Note
If the machine's network settings are already
configured, the [Setup Environment Confirmation]
dialog box appears asking you for confirmation to use
the machine with the current settings. You can
proceed with the setup using the current network
settings. To do so, click [Use as is]. To reconfigure the
network settings, click [Reconfigure].
5
Select [Wired LAN].
Note
If the wireless LAN settings are already configured,
the [Note on Network Settings] dialog box is
displayed. Generally, click [Wired connection only]
to enable only wired LAN.
If the machine's network settings have been set
before, the [Printer Network Setup] dialog box is
displayed. For details, see
Setup] dialog box is displayed during setup" on
page 66.
6
When the screen shown on the right appears,
connect the machine to the network devices
such as hubs with a LAN cable and click
[Yes]. Then click [Next].
Note
Connection may vary depending on your network
setup.
7
Setup automatically detects the machine.
The MP800R connected with the USB cable is detected automatically.
If the machine was not detected, the [Set Printer IP
Address] dialog box appears. Ensure that the
machine is on and connected to your computer with
a USB cable, then click [Connect] to retry detection.
If the machine is still not detected, refer to
Printer IP Address / Printer IP Address Setup]
dialog box is displayed during setup" on page
32 Setting Up the Machine and the Computer (Windows)
"The [Printer Network
"The [Set
64.