Restoring The Machine's Default Lan Settings To Perform Setup Again - Canon PIXMA MP560 Network Setup Manual

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Use the Easy-Scroll Wheel to select Settings, then
press the OK button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Reset LAN settings, then press the OK button.
0
5
Select Yes, then press the OK button.
6
Make sure that the screen shown to the right appears.
• After a while, the LAN settings screen returns.
The LAN setting of the machine is now restored to the default state.
• Perform setup again by following the procedures in "Wireless Setup" on page 19 and onward in
the printed manual: Getting Started.
<Default State>
Wireless connection Inactive
SSID BJNPSETUP
Data encryption Inactive
TCP/IP setting Obtain an IP address automatically