Restoring The Machine's Default Lan Settings To Perform Setup Again - Canon PIXMA MP640 series Getting Started Manual

Action
Restoring the Machine's Default LAN Settings to Perform Setup Again
(I!il)
cPo
----'-----------------
------------
.....
5
Select Yes, then press the OK button.
00 you want 10 re51r,'e
LAN setlings 10 lhe
factory settings?
f~TnfVOi\!J
Introduction
-----"8.
-->
J
No
I
Resel LAN settings
... ..
_-_.-
---
Following is completed.
6
Make sure that the screen shown to the right appears.
• After a while, the LAN settings screen returns.
,.'
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Use the Easy-Scroll Wheel to select Settings, then
press the OK button,
2
Select Device settings, then press the OK button.
lit
Settin~s
,-,(tlJ
r - - i
~ ~! I:~:!J I~
. .,o.ev!c:e.s.e!ti~9~
.3/4
Perform various sellings.
The LAN setting of the machine is now restored to the default state.
Perform setup again by following the procedures in "Wireless Setup" on page 22 and onward or
"Wired Setup" on page 29 and onward in the printed manual: Getting Started.
3
Select LAN settings. then press the OK button.
4
Select Reset LAN settings. then press the OK button. ~l
LAN settings
Change wireless/wired
'W;;;'iess'LAN
setuii-'---·
' C onfirmlAifsenings
'Dthe"s·ettiiigs----·
.~~~~t:L~E.~eftiij~:::···
Inactive
BJNPSETUP
Inactive
Obtain an IP address automatically
Inactive
Obtain an IP address automatically
10