Restoring The Machine's Default Lan Settings To Perform Setup Again - Canon PIXMA MX350 Network Setup Manual

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Press the Setup button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Reset LAN settings, then press the OK button.
5
Select Yes, then press the OK button.
6
Make sure that the completion screen appears, press the OK button.
• The LAN settings screen returns. Press the COPY button.
The LAN setting of the machine is now restored to the default state.
• Perform setup again by following the procedures in "Wireless Setup" and onward or "Wired
Setup" and onward in the printed manual: Getting Started.
<Default State>
Wireless LAN Inactive
SSID BJNPSETUP
Data encryption Inactive
TCP/IP setting Obtain an IP address automatically
Wired LAN Inactive
TCP/IP setting Obtain an IP address automatically