Changing The Size - Brother 882-S90/S91 Operation Manual

EDITING STITCH PATTERNS
No. Display
h
i
j
k
l
m
n
o

Changing the Size

Select a stitch pattern, then press
sewn in the size highlighted on the key.
Memo
• If you continue entering stitch patterns after changing the size, those patterns will also be sewn in that
size.
• You cannot change the size of combined stitch patterns once the stitch pattern is entered.
Actual Stitch Pattern Size
106
Key Name
Single/Repeat sewing Press this key to choose single stitches or continuous stitches.
key
Elongation key When 7mm satin stitch patterns are selected, press this key to choose from 5
automatic length settings, without changing the stitch zigzag width or stitch
length settings.
Size selection key Use this key to select the size of the stitch pattern (large, small).
Thread density key After selecting the stitch pattern, use this key to change the thread density of the
pattern.
Delete key When you make a mistake selecting a stitch pattern, use this key to delete the
mistake. When you make a mistake in combining stitch patterns, use this key to
delete stitch patterns.
Memory key Use this key to save stitch pattern combinations.
Stitch width and stitch Shows the stitch width and stitch length of the selected stitch pattern. The
length key machine has default settings.
Thread tension key Shows the thread tension setting for the selected stitch pattern. The machine
has default settings.
to change the size of the stitch pattern. The stitch pattern will be
L
L
Explanation
S
S
Page
107
107
106
108
100, 101
118-119
42-43
43