Changing The Needle - Brother 882-S90/S91 Operation Manual

CHANGING THE NEEDLE

CHANGING THE NEEDLE

• Always press
Stop button or another operation button is pressed accidentally, the machine will start and injury may
result.
• Use only sewing machine needles made for home use. Other needles may bend or break and may cause
injury.
• Never sew with a bent needle. A bent needle will easily break and may cause injury.
Memo
To check the needle correctly, place the flat
side of the needle on a flat surface. Check the
needle from the top and the sides. Throw
away any bent needles.
a Parallel space
b Level surface (bobbin cover, glass, etc.)
a
Press the "Needle Position" button to raise
the needle.
b
Press
→ The key appears as
34
on the screen before changing the needle. If
a
b
.
.
CAUTION
c
Use the screwdriver to turn the screw
toward the front of the machine and loosen
the screw, then remove the needle.
Note
• Do not apply pressure to the needle clamp
screw. Doing so may damage the needle or
machine.
is not pressed and the Start/