Download Print this page
Öhlins HO 519 Mounting Instructions

Öhlins HO 519 Mounting Instructions

Shock absorber kit for honda hornet 600

Advertisement

Quick Links

F1
R1
R2
Bike on a stand.
Bike on the ground.
Setup data
Shock absorber length
304 mm
Shock absorber stroke
54 mm
Spring pre-load
12 mm
Rebound damping adjuster
16 clicks
Compression damping adjuster
10 clicks
Öhlins Racing AB, Box 722, S-194 27 Upplands Väsby, Sweden.
Phone +46 8 590 025 00. Fax +46 8 590 025 80.
F2
R3
Bike with rider on.
Checking sag and ride height
Front suspension
F1. Bike on a stand with the
suspension fully extended
F2. Bike on the ground without rider = ............
F3. Bike on the ground with rider
F1 - F2 = ............
Free sag
F1 - F3 = ............
Ride height
Rear suspension
R1.Bike on a stand with the
suspension fully extended
R2.Bike on the ground without rider = ........... .
R3.Bike on the ground with rider
R1 - R2 = ............
Free sag
R1 - R3 = ............
Ride height
www.ohlins.com
F3
Öhlins shock absorber kit HO 519 for Honda Hornet 600
Compression
damping
aduster.
= ............
= ............
= ............
= ............
© Öhlins Racing AB. All rights reserved. Any reprinting or unauthorized use without the
Mounting Instructions
Öhlins shock absorber 46 HRCS
Spring
Your Öhlins shock absorber type 46 HRCS
pre-load
features the following adjusters:
adjuster
Compression damping adjuster
Adjustments are made on top of the reservoir.
Rebound damping adjuster
Adjuster wheel on the piston shaft above the end
bracket.
Spring pre-load adjuster
Adjustments are made by turning the rings with
the c-spanner. Clockwise for harder adjustment,
counter clockwise too release the pre-load.
When delivered the Öhlins shock absorber is
dialed to recommended settings for the specific
brand and make of the vehicle. If you have
changed the settings, check like this:
The adjusters have a normal right hand thread. Turn
Rebound
the damping adjusters clockwise to fully closed (pos.
damping
zero [0]). Turn counter clockwise to open and count
adjuster
the clicks until you reach the recommended number
of clicks. See Setup data at last page.
Do not use too much force, delicate sealing sur-
faces can be damaged.
written permission of Öhlins Racing AB is prohibited. Printed in Sweden.
NOTE!
CAUTION!

Advertisement

loading

Summary of Contents for Öhlins HO 519

  • Page 1 Mounting Instructions Öhlins shock absorber kit HO 519 for Honda Hornet 600 Bike on a stand. Bike on the ground. Bike with rider on. Öhlins shock absorber 46 HRCS Compression Spring Setup data Checking sag and ride height Your Öhlins shock absorber type 46 HRCS...
  • Page 2 Remove the shock absorber. Description Pcs. Part No. 01085-04 importance with regard to procedures. Shock absorber 46 HRCS HO 519 00153-04 C-spanner single 00710-02 Put the Öhlins shock in place in reverse order. Hose clamp 00643-02 Mount the upper and lower mounting bolts. Use...