Protection Function; Technical Data - Godox V860 III Instruction Manual

Protection Function

1. Over-Temperature Protection
● To avoid overheating and deteriorating the flash head, there is
over-temperature protection in the system. When continuously
firing for many times, the inner over-temperature protection
function may be activated and make the recycling time slow.
If this occurs, allow a rest time of about 10 minutes, and the flash
unit will then return to normal.
● When the over-temperature protection is started,
the LCD display.
Number of flashes that will activate over-temperature
protection:
Number
ZOOM
of Flashes
(mm)
20 24 28
Power
Output Level
1/1 40 50 50
1/2 50 60 60
1/4 100 100 100
1/8 200 200 200
1/16 300 300 300
1/32 500 500 500
1000 1000 1000
1/64
1/128 2000 2000 2000
Number of flashes that will activate over-temperature
protection in high-speed sync triggering mode:
Number
ZOOM
of Flashes
(mm)
20 - 200
Power
Output Level
1/1 30
1/2 30
1/4 34
1/8 40
1/16 50
1/32 50
1/64 60
1/128 60
2. Other Protections
The system provides real-time protection to secure the device and
your safety. The following lists prompts for your reference:
Prompts on LCD Panel Meaning
E1 A failure occurs on the recycling system so that the
flash cannot fire.
Please restart the flash unit. If the problem still exists,
please send this product to a maintenance center.
E2 The system gets excessive heat. Please allow a rest
time of 10 minutes.
E3 The voltage on two outlets of the flash tube is too high.
Please send this product to a maintenance center.
There are some errors occurred during the upgrading
E9
process. Please using the correct firmware upgrade
method.
- 53 -
is shown on
35 50 70 80 105 135 200
60 60 75 75 80 80 80
75 75 100 100 100 100 100
100 120 150 150 150 150 150
200 200 200 200 200 200 200
300 300 300 300 300 300 300
500 500 500 500 500 500 500
1000 1000 1000 1000 1000 1000 1000
2000 2000 2000 2000 2000 2000 2000

Technical Data

Model V860IIIO
Compatible Cameras
Olympus/Panasonic cameras (TTL autoflash)
Power (1/1 output)
76Ws
Guide No.(1/1 output, GN≈60 (m ISO100)
200mm)
Flash Focal Length
20 to 200mm
Coverage
• Auto zoom (Flash coverage set automatically
to match the lens focal length and image size)
• Manual zoom
• Swinging/tilting flash head (bounce flash): 0 to 330°
horizontally and -7° to 120° vertically
Flash Duration 1/300 to 1/20000 seconds
• Exposure Control
Exposure control system TTL autoflash and manual flash
Flash exposure
Manual. FEB: ±3 stops in 1/3 stop increments
(Manual FEC and FEB can be combined.)
compensation (FEC)
FE lock With <FEL> button or < * > button
Sync mode High-speed sync (up to 1/8000 seconds),
first-curtain sync, and second-curtain sync
Multi flash Provided (up to 90 times, 100Hz)
• Wireless Flash
Wireless flash function Transmitter, Receiver, Off
Transmitter groups M, A, B, C
Controllable A, B, C, D, E (D/E group can be controlled
Receiver groups
by X series flash trigger)
Transmission range
100m
(approx.)
32 (1~32)
Channels
01~99
ID
• Auto Focus Assist Beam
Effective range (approx.) Center: 0.6~10m / 2.0~32.8 feet
Periphery: 0.6~5m / 2.0~16.4 feet
• LED Modeling Lamp
Power 2W
Color Temperature 5300K±200K
Modeling flash Fired with camera's depth-of-field preview button
• Power Supply
Power source 7.2V/2600mAh Li-ion battery
Recycle time Approx 1.5 seconds. Green LED indicator will light up
when the flash is ready.
Full power flashes
Approx. 480
Power saving Power off automatically after approx. 90 seconds
of idle operation. (60 minutes if set as Receiver)
• Sync Triggering Mode
Hotshoe, 2.5mm sync line
• Dimensions
W x H x D
195*75*59 mm
Weight without battery
410g
Weight with battery
520g
2.4G Frequency Range
2413.0MHz-2465.0MHz
Max. Transmitting Power 5dbm
- 54 -