Install The Printhead - Canon MultiPASS F20 Setup

Install the printhead.

IMPORTANT
• To turn off the machine, be sure to always press [ON/OFF]. This will ensure that the
printhead is capped and prevent it from drying up.
• If you are not using the machine for a long period of time, we recommend that you
print (in black and color) or clean the printhead approximately once a month to
maintain the printhead in good working condition.
Remove the tape q, then open the inner cover w.
1
• The printhead holder automatically moves to the left of the machine.
q
2
Remove the printhead from its packaging, then remove the orange protective
cap A.
A
Raise the lock lever C, then gently slide the printhead into the holder.
3
Lower the lock lever.
IMPORTANT
• Do not touch the lock lever once the printhead has been installed.
w
IMPORTANT
• Do not touch the electrical contacts B.
B
C
IMPORTANT
• Do not try to manually move or
stop the printhead holder.
• Do not touch any metal parts
inside the machine.
• Do not turn off the machine when
opening the inner cover.
Turn over to Turn over to
continue continue