Align The Printhead - Canon MultiPASS F20 Setup

Align the printhead.

NOTE
• If you will be installing the MultiPASS Suite software, you can also align the printhead
from the software. For details, see p. 9-7 of the Basic Guide.
When the LCD A displays the following, press [Set].
1
A L I G N P R I N T H E A D
P R E S S S E T K E Y
The machine will print a horizontal line pattern, and the LCD will display:
C H A N G E H V A L U E
A 0
Column A Value for column A
2
In column A on the printout, note which box has the most solid image. Note the
value next to this box and use
Then press [Set].
3
Repeat step 2 for columns B to F.
After finishing the setup, the machine returns to standby mode.
Ex:
1 0 0 % L T R T E X T
P L A I N
[2] or [3] on the operation panel to enter it.
BAD
SAMPLE
Least solid
box
GOOD
SAMPLE
Most solid
box
A