Canon MultiPASS F20 Setup page 3

2
Lift up the tray extension.
3
Place a stack of paper (print side up) in the multi-purpose tray
paper guide A to the width of the stack w. Make sure the stack does not exceed
the paper limit mark B.
A A
NOTE
• When you are not printing, remove the paper stack from the multi-purpose tray and
close the tray.
Open the paper output tray q, then pull out the tray extension w.
4
Printouts will exit the machine here.
q
w
NOTE
• When you are not printing, you can close the paper output tray.
q
w
q and adjust the
B