Westfalia 802410 Instruction Manual page 9

 Use only original sanding discs and pads.
 Protect the tool, air inlet and operating elements in particular, from dust and
dirt.
 Make sure that the max. permissible working pressure stated in the Technical
Specifications is not exceeded.
 The working pressure must be adjusted by a pressure regulator.
 Do not overload tool – use it only within the performance range it was
designed for (see Technical Specifications).
 Let tool run idle for a short time only.
 Do not open the unit and do not try to repair it yourself. In case of questions or
problems contact a professional or our customer service. Only use original
replacement parts.
Safety Notes
5