Receiving Both Faxes And Voice Calls Automatically: Faxtel Mode; Customizing Faxtel - Canon imageCLASS MF5750 Facsimile Manual

Receiving Both Faxes and Voice Calls Automatically:
FaxTel Mode
■ Select This Mode If:
•
you only have one telephone line for both fax and telephone use.
•
you want to receive faxes automatically as well as voice calls.
■ You Will Need to:
•
set <FaxTel>. (See "Setting the Receive Mode," on p. 5-1.)
•
connect a telephone to the machine. (See "Connect the telephone cable and necessary
external device," in the Set-Up Instructions (for MF5750 users) or Set-Up Instructions for
the Machine (for MF 5770 users).)
■ When You Receive a Fax Call
The machine will receive the fax automatically.
■ When You Receive a Voice Call
The machine will ring. Pick up the handset to answer the call.

Customizing FaxTel

You can customize this mode to control precisely how your machine handles
incoming calls. You can adjust the time the machine takes to check whether a call is
a fax or voice call, the length of time the machine rings when it is a voice call, and
the action the machine must take if no one answers a voice call.
Follow this procedure to customize <FaxTel>:
NOTE
We recommend you leave these settings on the default settings unless you have a
particular need to change them. Certain settings can affect your ability to receive faxes.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <FAX SETTINGS> ➞ press [Set].
3
Press [ (-)] or [ (+)] to select <RX SETTINGS> ➞ press [Set].
Setting the Receive Mode
5
5-3