Sending Faxes; Sending Methods; Memory Sending - Canon imageCLASS MF5750 Facsimile Manual

Sending Faxes

This chapter describes the different ways to send faxes. It also explains how to adjust scan
settings to improve the image quality.

Sending Methods

There are two methods of sending faxes from the machine:

- Memory Sending

- Manual Sending
NOTE
•
You can also fax the documents from your computer. If you want to install the software for
fax sending, see the following:
- "To Use the Machine as a Local Printer (USB Connection)," or "To Use the Machine as
a Network Printer (Network Connection)," in the Set-Up Instructions for Networking and
Printing (MF5770 Model Only)
- Chapter 1, "Installation," in the Software Guide
•
For details on how to send faxes from your computer, see Chapter 4, "PC Faxing
(MF5750/MF5770 Models Only)," in the Software Guide.
Memory Sending
You should normally use memory sending to send documents efficiently.
If <MEMORY FULL> is displayed, the machine cannot scan the documents. In this
case, wait for the machine to send any faxes stored in the memory, then scan the
documents.
4
CHAPTER
4-1
Sending Methods