Harmonic ProView 7000 Installation Manual page 30

Appendix B Compliance, Safety, and Agency
Approvals
Symbol
© 2014 Harmonic Inc. All rights reserved.
Name
Route power cords and other cables so that they are

not likely to be damaged. Disconnect power before
cleaning. Do not use liquid or aerosol cleaners; use
only a damp cloth.
Dangerous voltages exist at several points in this

product. To avoid personal injury, do not touch
exposed connections and components while power
is on. Do not insert anything into either of the
system's two power supply cavities with power
connected.
Do not wear hand jewelry or watches when

troubleshooting high current circuits, such as the
power supplies.
To avoid fire hazard, use only the specified correct

type, voltage and current rating as referenced in the
appropriate parts list for this product. Always refer
fuse replacement to qualified service personnel.
Mechanical Loading - Mounting of the equipment in

the rack should be such that a hazardous condition is
not achieved due to uneven mechanical loading. "
47
Description
<Product Short Name> Release XXX, Rev A
Safety Symbols