Switching On - Harmonic ProView 7000 Installation Manual

Chapter 1 ProView™ 7000 Installation Guide

Switching On

Before switching the ProView 7000 on, make sure that all cables are correctly connected. Ensure
that the unit is connected to the main power supply and correctly grounded.
Switch the unit on with the rear power switch.

Once the boot process is completed (after 2‐3 minutes) the Status OK message displays on
the front panel LCD.
© 2014 Harmonic Inc. All rights reserved.
Status OK
Figure 3: Front panel startup display
10
No Service Selected
No Service Selected
ProView 7000 Release 3.4, Rev A
Switching On