Cisco Catalyst IR1800 Series Installation Manual page 39

Rugged router hardware

Hide thumbs Also See for Catalyst IR1800 Series:

Table of Contents

Installing the Router

Procedure

Step 1

Position the router so that the clamps (1) on the DIN rail bracket hook onto the top edge of the DIN rail (2). The

weight of the product can rest on the hook temporarily while the plastic latches are secured.

Step 2

Pull down the plastic latches (3) at the same time and position the DIN rail bracket so that the top and bottom

edges of the DIN rail are within the clamps.

Step 3

Release the plastic latches after the DIN rail is firmly within the clamps to secure it. The router is now installed

in the DIN rail.

Step 4

To remove the router from the DIN rail, reverse the procedure.

Clamps

Din Rail

Plastic Latches

Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide

Attaching the Bracket to the DIN Rail

Table of Contents

Catalyst ir1821 Catalyst ir1831 Catalyst ir1833 Catalyst ir1835Catalyst ir1800 rugged series