privileg SY-103E6S-E11-C29-L12-900 User Manual page 43

3. Place the retaining plate (7) onto the lower
flue screen (3) so that it lines up with the
chamfers on the inside. (Screws and elon-
gated holes should point upwards).
4. Turn two plate screws (8) from the outside
through the retaining plate (7) and the
lower flue screen (3). Tighten the screws
somewhat, but only loosely.
5. Place the upper (2) and lower (3) parts of
the flue screen onto the exhaust hood (1)
with the closed side of the flue screen fac-
ing upwards.
(7)
(8)
2x
(3)
(8)
6. Fasten the lower part (3) of the flue screen
with 2 plate screws (8) to the sides of the
exhaust hood (1).
7. Only for exhaust air operation: Insert the
exhaust air hose (4) into the connection
at the wall break (hose end with 150 mm
diameter).
Page EN-15
Assembly
2x