Assembling Instructions - Parkside PHSL 900 A1 Translation Of The Original Instructions

IE
GB NI
f) wear suitable clothing! Do not wear
loose clothing or jewellery that can
become jammed in the moving parts.
It is recommended that you wear solid
gloves, non-slip shoes and protective
goggles.
g) Wear ear and eye protection.
h) Release the on-off button to shut down
the device in an emergency.
Operation
a) Switch the appliance off and remove
the mains plug, before:
- cleaning or removing a blockage;
- inspection, servicing or work on the
hedge trimmer;
- adjusting the working position of the
cutting unit;
- leaving the hedge trimmer unattended.
b) Always ensure that the hedge trimmer
is properly placed in one of the indica-
ted working positions before the motor
is started.
c) While operating the hedge trimmer,
always ensure that you have a secure
footing, particularly if steps or a lad-
der is being used.
d) Do not use the hedge trimmer with a de-
fective or strongly worn-out cutting unit.
e) To avoid the risk of fire, ensure that the
motor is free from deposits and leaves.
f) Always ensure that all handles and
safety devices are mounted when you
use the hedge trimmer. Never try to
use an incomplete hedge trimmer or a
hedge trimmer with impermissible mo-
difications.
g) Always use both hands when the
hedge trimmer is equipped with two
handles.
h) Always familiarise with your surroun-
dings and pay attention to potential
dangers that you cannot hear because
of the noise the hedge trimmer makes.
12
CY
Maintenance and storage
a) If the hedge trimmer is taken out of ope-
ration for purposes of maintenance, in-
spection or storage, turn off the motor,
pull the mains plug and make sure that
all rotating parts have come to a stand-
still, and let the machine cool down
before you check or adjust it, etc.
b) Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge trim-
mer always fit the cutting device cover.
Proper handling of the hedge trimmer
will reduce possible personal injury
from the cutter blades.
Assembling
instructions
Pull out the power plug before carry-
ing out any work on the equipment.
Use only original parts.
The long-shaft hedge trimmer can
be used optionally with or without
the middle tubular shaft (
1. Unpack the device and check it for
completeness.
Assembly of the middle tubu-
B
lar shaft (9) (optional):
2. Remove the cap (23) from the middle
tubular shaft (9).
Loosen the star wheel (11).
Slide the middle tubular shaft (9) onto
the tubular shaft on the appliance hous-
ing (12) in a slight rotating movement.
When doing so, the retaining knob
(10) locks into place. Fix the two tubu-
lar elements in place with the rotary
knob (11).
9).